CUSTOM KPM180H – Configuration

In this article we will go through how to configure the CUSTOM KPM180H printer. This will include how to install the printer, local printer settings and how to select the printer in VisitLog.

1. Download printer drivers

  1. Begin with unplugging the USB at the back of the printer but keeping the power connected.
  2. Download and run the driver, then follow the steps below.

1.1 Driver installation

  1. Click Next.
  2. Click Yes.
  3. Click Next.
  4. Choose CUSTOM KPM180H with cutter and click Next.
  1. Choose FULL Driver and click Next.
  2. Read the Warning text and click Next.
  3. Select USB.
  4. Reconnect the USB cable.
  1. Wait for the installation to finish.
  2. Check Set Printer As Default and click Finish.
  1. Lastly, restart you computer to finish the installation.

2. Local printer settings

  1. From the Control Panel open the Printer properties for the CUSTOM KPM180H printer.
  1. Go to Facility Tool and click on Activate Facility Tool.
  1. Go to Notch/Black Mark. Enter “-2”, and click Set on printer.

3. Select printer in VisitLog

  1. Open VisitLog Manager and go to Administration.
  1. Go to Local settings.
  1. Select CUSTOM KPM180H out of the list and save.
Updated on August 17, 2023

Was this article helpful?

Related Articles

Leave a Comment