FM3050 & FM3080 – Configuration

In this article we will go through how to configure the FM3050 and FM3080 scanner. This will include how to install the scanner, local scanner settings and how to select the scanner in VisitLog.

1. Download scanner drivers

  1. Download and run the driver, then follow the steps below.

1.1 Driver installation

  1. Accept the License Agreement and click Install.
  2. Click Next.
  1. Wait for the installation to finish.
  2. Click Finish.
  1. Wait for installation to finish.
  2. Click Finish.
  1. Lastly, restart you computer to finish the installation.

2. Local scanner settings

We have created a configuration file with the correct settings required for our labels. Read below on how to upload it to the scanner.

2.1 Download FM3050-FM3080 EasySet and Config

2.2 Import FM3050-FM3080 Config

Download EasySet and follow the instructions below to upload the configuration file to the scanner.

  1. Open EasySet and go to Online Device.
  1. Click on Configure Device. If the scanner is not show, scan the barcode below.
    • a) Enter Setup
    • b) USB CDC COM Port
  1. Ensure that Interface is set to USB CDC COM Port.
  2. Click Open Config and select the FM3050-FM3080 Config.
  3. Click Save to Device.

3. Select scanner in VisitLog

  1. Open VisitLog Manager and go to Administration.
  1. Go to Local settings.
  1. Install the VisitLog scanner driver if you haven’t already.
  2. Set the port to the highest available number.
  3. Save the settings, and then hit Restart.
Updated on August 17, 2023

Was this article helpful?

Related Articles

Leave a Comment