TSP700II – Change roll

In this article we will go through how to change the roll of a TSP700II, the printer fitted in the VL022.

1. Open the printer

Begin by opening the printer cover to access the roll compartment.

  1. Press this button forward to release printer cover.
  2. Lower down the cover to expose the inside.

2. Position the roll guide

  1. Ensure that the roll guide is positioned as depicted in the picture below and locked in place.

3. Fit the new roll

  1. Place the roll in the direction depicted in the picture below.
  2. Do not place the roll behind the tension rod.

4. Close the printer cover

  1. Position the label above the edge of the cover.
  2. Push on the printer cover to close it, the printer will adjust and cut the label to the starting position.
Updated on August 17, 2023

Was this article helpful?

Related Articles

Leave a Comment